813 E. Locust St.
P.O. BOX 965
815-756-2741
800-435-4481
 Transformer Riser Wire Cathodic Protection Cable |
DESCRIPTION
Single conductor composed of annealed, uncoated stranded copper, with or without a strand shield, cross-linked polyethylene insulation. Rated 600 volts or 5000 volts as identified.
APPLICATION
For low and medium voltage power transmission of 600 volts to 5000 volts primarily used for airport lighting and control circuits. Cables are suitable for use in conduit, duct, aerial, and direct burial applications.
SPECIFICATION
Federal Aviation Administration per L-824, type C.
ICEA No. S-66-524
ASTM B-3
ASTM B-8
| Size (AWG) | Stranding | Nominal Diameter (Inches) | Insulation Thickness (Mils) | Weight/1000' (Lbs) |
| 600 VOLT | ||||
| 12 | 7 | .215 | 60 | 35 |
| 10 | 7 | .240 | 60 | 50 |
| 8 | 7 | .270 | 60 | 70 |
| 6 | 7 | .305 | 60 | 105 |
| 4 | 7 | .355 | 60 | 155 |
| 5000 VOLT | ||||
| 8 | 7 | .380 | 110 | 95 |
| 8 | 19 | |||
| 6 | 7 | .415 | 110 | 130 |
| 6 | 19 | |||
| 4 | 7 | .465 | 110 | 185 |
DESCRIPTION
Soft drawn copper conductors, either solid or stranded, covered with HMW Polyethylene.
APPLICATION
Used as non-insulated transformer risers intended to reduce faults due to atmospheric conditions, vibrations, and crossed leads.
SPECIFICATION
ASTM B-3
ASTM B-8
ANSI C-8.35
| Diameter (Mils) | |||||
| Size | Stranding | Covering Thickness Mils* | Bare Conductor | Covered | Wt./1000 Ft. |
| 8 | Solid | 110 | 128.5 | 348.5 | 83 |
| 6 | Solid | 110 | 162.0 | 382.0 | 117 |
| 6 | 7/.0612 | 110 | 184.0 | 404.0 | 122 |
| 4 | Solid | 110 | 204.3 | 424.3 | 170 |
| 4 | 7/.0772 | 110 | 232.0 | 452.0 | 177 |
| *High density Polyethylene and other covering thickness available upon request. | |||||
DESCRIPTION
Soft drawn bare copper strand. High-molecular-weight, low density black polyethylene (HMW PE) covering. Sizes: 8 AWG-500 MCM.
APPLICATION
Designed for use in Cathodic systems to protect against galvanic and electrolytic corrosion of underground or submerged metallic objects. Specifically applied to underground pipelines, dams and lock gates, fresh or salt water steel piles, tanks, condensers, and ship hulls.
SPECIFICATION
ASTM B-3 Bare copper
ASTM B-8 Class B Stranding
ICEA S-61-402
NEMA WC5 Part 2 Para. 3.9
ASTM 1248
| Size (AWG or MCM) | Stranding | Insulation Thickness Mils | Nominal Diameter Inches | Nominal Weight (Lbs.)/1000 Ft. |
| 8 | 7/.0486 | 110 | .370 | 90 |
| 6 | 7/.0612 | 110 | .410 | 125 |
| 4 | 7/.0772 | 110 | .460 | 180 |
| 2 | 7/.0974 | 110 | .520 | 272 |
| 1 | 19/.0664 | 125 | .590 | 337 |
| 1/0 | 19/.0745 | 125 | .630 | 415 |
| 2/0 | 19/.0837 | 125 | .680 | 510 |
| 3/0 | 19/.0940 | 125 | .735 | 625 |
| 4/0 | 19/.1055 | 125 | .790 | 777 |
| 250 | 37/.0822 | 155 | .900 | 935 |
| 350 | 37/.0973 | 155 | 1.010 | 1269 |
| 500 | 37/.1162 | 155 | 1.140 | 1770 |