DeKalb, Illinois 60115 813 E. Locust St. P.O. BOX 965 815-756-2741 800-435-4481	Copper-Clad Steel Tie Wire Polyethylene Covered Solid Copper-Clad Steel Wire
COPPER-CLAD STEEL WIRE
Bare Solid Copper-Clad Steel Wire DESCRIPTION Hard drawn and annealed, 40% and 30% conductivity copper-clad steel wire. APPLICATION Ground wires; telephone, telegraph, and railway signal line. SPECIFICATION ASTM B-227
HARD DRAWN AND ANNEALED SIZE DIAMETER BREAKING LOAD, Lbs. WEIGHT RESISTANCE CROSS-SECTION 40% Conductivity 30% Conductivity Ohms per 1,000 Ft. 68°F. Awg Inch Hard Drawn Minimum Annealed Approx. Hard Drawn Minimum Annealed Approx. Lbs. per 1,000 Ft. Lbs. per Mile 40% Cond. 30% Cond. Cir. Mils. Sq. In. 4 .2043 2,750 1,480 2,950 1,640 115.8 611.6 .6337 .8447 41,740 .032,78 5 .1819 2,260 1,170 2,420 1,300 91.86 485.0 .7990 1.065 33,100 .026,00 6 .1620 1,865 930 2,000 1,030 72.85 384.6 1.008 1.343 26,250 .020,62 7 .1443 1,540 740 1,630 820 57.77 305.0 1.270 1.694 20,820 .016,35 8 .1285 1,265 580 1,350 650 45.81 241.9 1.602 2.136 16,510 .012,97 9 .1144 1,040 460 1,110 510 36.33 191.8 2.020 2.693 13,090 .010,28 10 .1019 850 370 925 410 28.81 152.1 2.547 3.396 10,380 .008,155 11 .09074 700 320 765 360 22.85 120.6 3.213 4.284 8,230 .006,467 12 .08081 575 260 625 280 18.12 95.68 4.051 5.399 6,530 .005,129
Back to top of page
Copper-Clad Steel Tie Wire
DESCRIPTION Bare and polyethylene covered copper-clad steel tie wire. APPLICATION To lash or anchor conductors to pin type insulators. SPECIFICATION ASTM B-227
SIZE Awg DIAMETER Inch WEIGHT Lbs. per 1,000 Ft. Approx. Number of Feet Per Pound Approximate Number of Tie Wires in 10-Pound Package for Lengths of 24' 26' 28' 30' 32' 8 .1285 45.81 21.8 110 100 092 086 082 9 .1144 36.33 27.5 138 126 118 110 102 10 .1019 28.81 34.7 174 160 148 138 130 11 .9007 22.85 43.7 220 202 186 176 164 12 .0808 18.12 55.2 274 256 236 220 206 *Also available with HMW Polyethylene covering
Back to top of page
Polyethylene Covered Solid Copper-Clad Steel Wire
DESCRIPTION HMW polyethylene covered copper-clad steel wire. APPLICATION Telephone and signal lines, alarm circuits, remote control, tree wire, and grounding wire. SPECIFICATION ASTM B-228
POLYETHYLENE COVERED CONDUCTOR Type & Size WIRE DIAMETER Inch BREAKING STRENGTH Lbs. DC RESISTANCE Ohms per 1,000 Ft. at 68°F COVERING THICKNESS Inch Approx. DIAMETER Inch WEIGHT (approx.) Lbs. per 1,000 Ft. WEIGHT (approx.) Lbs. Per Mile High Strength 30% Conductivity No. 6 Awg .1620 2,680 1,343 2/64 .225 80.3 424 No. 8 Awg .1285 1,815 2.136 2/64 .191 51.8 274 No. 9 Awg .1144 1,491 2.693 2/64 .177 41.7 220 No. 10 Awg .1019 1,231 3,396 2/64 .164 33.9 179 High Strength 40% Conductivity No. 6 Awg .1620 2,433 1.008 2/64 .225 80.3 424 No. 8 Awg .1285 1,660 1.602 2/64 .191 51.8 274 No. 09 Awg .1144 1,368 2.020 2/64 .177 41.7 220 No. 10 Awg .1019 1,130 2.547 2/64 .164 33.9 179 No. 12 Awg .08081 785 4.051 2/64 .143 22.3 118
NEHRING ELECTRICAL WORKS CO., DeKalb, Illinois 60115 - 815-756-2741 - 800-435-4481